RESOURCES

PRODUCTS

  • TES-1

    110lb refrigerant scale

  • TEL-1

    Refrigerant leak detector

  • TEP-5D

    5 cfm dual stage dual voltage vacuum pump

  • CD3830

    Locking cap multi tool with three bits

  • CD3956

    Ball Valve Core Removal Tool (BV-CRT) for use on 5/16″ flare access fitting, 1/4″ m. flare side port for attaching hose or gauge

  • CD2080

    5/16″ F. flare compact thumbscrew core depressor with 1/4″ M. flare access port

  • CD2295

    5/16″ m. flare locking cap, comes in pkgs of 2, 10, and 50.

  • CD2290

    1/4″ m. flare locking cap, comes in pkgs of 2, 10, and 50.

  • CD4311

    Locking pliers that clamp on and pierce tubing. For tubing sizes 1/4″ to 7/8″.

  • CD1818

    1/4″ m. flare access x 1/8″ MPT body, CD2250 brass cap and valve core

  • CD9580SVK

    Deluxe refrigeration service kit, includes: CD8404 (3), CD8408 (3), CD8403 (3), CD8405 (3), CD8434 (1), CD8478 (1), CD3930 (1), CD9611 (2), CD8438 (2), CD9603 (2), CD2245 (10), CD5514 (3), CD5538 (3), CD5534 (1) , CD5578 (1), CD5050 (1), CD3805 (1), CD381

  • CD9530SVK

    Appliance service kit, includes: CD5050 (1), CD3805 (1), CD4338 (1), CD8400 (3), CD8403 (3), CD8404 (3), CD8405 (3), CD8408 (3), CD5514 (3), CD2245 (6)

  • CD5163

    5/16″ OD X 5/16″ viton hose grommet

  • CD5161

    5/16″ OD X 5/16″ neoprene hose grommet

  • CD5038

    1/2″ OD hose grommet for 3/8″ charging hoses

  • CD4460

    Valve core with teflon seal (blue), tapered barrel

  • CD3688

    1/8″ NPT locknut for 3600 series

  • CD2577

    1/4″ flare hex nut

  • CD2270

    1/4 flare security cap, tamper resistant cap to prevent access system

  • CD2265

    1/4 flare cap, round brass w/ neoprene o-ring seal, attached keeper chain to prevent loss of cap

  • CD2260

    1/4 flare cap, round brass w/ neoprene gasket seal

  • CD2255

    Tamper-resistant 1/4 flare cap, round brass w/ neoprene o-ring seal, security wire

  • CD2250

    1/4 flare cap, round brass w/ neoprene o-ring seal and core wrench on top

  • CD2245

    1/4 flare cap, round brass w/ neoprene o-ring seal

  • CD2235

    1/4 flare cap, brass hex w/ neoprene o-ring seal

  • CD2225

    1/4 flare cap, brass hex w/ metal-to-metal seal, also used for M-series fittings

  • CD2221

    1/2-16 Acme cap, black glass-filled nylon w/ neoprene o-ring seal and retainer strap

  • CD2220

    1/2-16 Acme cap, black glass-filled nylon w/ neoprene o-ring seal

  • CD2217

    1/4 flare cap, black glass-filled nylon w/ neoprene o-ring seal and black retainer strap

  • CD2215

    1/4 flare cap, round black glass-filled nylon w/ neoprene o-ring seal and retainer strap

  • CD2214

    M10 x 1.25 cap, round black glass-filled nylon w/ neoprene o-ring seal

  • CD2209

    M8 x 1.0 high side red glass-filled nylon cap w/ neoprene o-ring seal

  • CD2208

    M8 x 1.0 low side blue glass-filled nylon cap w/ neoprene o-ring seal

  • CD1090

    O-ring – size 109

  • CD1070

    O-ring – size 107

  • CD1060

    O-ring – size 106

  • CD0400

    1/4 flare forged nut (short)

  • CD0101

    O-ring – size 010

  • CD0099

    O-ring – size 009

  • CD0077

    O-ring – size 007

  • CD0066

    O-ring – size 006

  • CD5036

    Automotive adapter, 1/4″ m. flare x 3/16″ f. flare with floating core depressor

  • CD5016

    High side retrofit adapter, straight R134a high side stem (16mm) x 1/4 f. flare, red cap

  • CD5013

    Low side retrofit adapter, straight R134a low side stem (13mm) x 1/4 f. flare, blue cap

  • CD2613

    1/4″ f. flare coupler x 1/4″ f. flare coupler x 1/4″ m. flare access on branch, couplers have o-ring seals

  • CD2597

    1/4″ OD x 1.25″ copper tube w/ 1/4″ f. flare swivel nut and depressor tip at one end and 1/4″ m. flare access at other, no core or cap

  • CD2595

    1/4″ OD x 1.25″ copper tube w/ 1/4″ f. double flare and depressor tip at one end and swaged for 1/4″ at other end

  • CD2594

    1/4″ OD x 1.25″ copper tube w/ 1/4″ f. double flare and depressor tip at one end

  • CD2542

    36″ capillary tube w/ 1/4″ f. double flare on each end, depressor tip at each end

  • CD2541

    36″ capillary tube w/ 1/4″ f. double flare on each end, depressor tip at one end

  • CD2540

    36″ capillary tube w/ 1/4″ f. double flare on each end, no depressor tips

  • CD2098

    1/4″ f. flare “Sure Seal” Retainer Coupler x 1/8″ FPT”

  • CD2094

    1/4″ f. flare “Sure Seal” Retaining Coupler x 1/4″ FPT

  • CD2084

    1/4″ f. flare “Sure Seal” Retaining Coupler x 1/4″ MPT

  • CD2041

    1/4″ f. flare swivel w/ depressor tip and seal x 1/4″ FPT

  • CD2038

    1/4″ f. flare swivel w/ depressor tip and seal x 3/8″ m. flare

  • CD2037

    1/4″ f. flare “Sure Seal” Retaining Coupler x 3/8″ m. flare

  • CD2035

    1/4″ f. flare “Sure Seal” Retaining Coupler x 1/4″ m. flare

  • CD2030

    1/2″ m. Acme x 7/16″ f. Acme swivel, depressor tip and seal, valve core and 1/2″ Acme cap

  • CD2029

    7/16″ f. Acme swivel w/ depressor tip and seal x 1/4″ m. flare, valve core and cap

  • CD2028

    1/2″ f. Acme swivel w/ depressor tip and seal x 1/4″ m. flare

  • CD2027

    1/2″ f. Acme swivel w/ depressor tip and seal x 1/4″ m. flare, valve core and cap

  • CD2026

    Adapter – 7/16″ m. Acme w/ internal threads x 1/4″ f. flare hex, valve core, 7/16″ Acme cap and copper gasket

  • CD2024

    Adapter – 1/2″ m. Acme w/ internal threads x 1/4″ f. flare hex, valve core, 1/2″ Acme cap and copper gasket

  • CD2022

    Adapter – 3/8″ f. flare hex x 1/2″ m. Acme, for permanent installation

  • CD2020

    Adapter – 1/4″ f. flare hex x 1/2″ m. Acme, for permanent installation

  • CD2019

    1/4″ f. flare swivel w/ depressor tip and seal x 1/8″ FPT

  • CD2018

    1/4″ f. flare swivel w/ depressor tip and seal x 1/8″ MPT

  • CD2014

    1/4″ f. flare swivel w/ depressor tip and seal x 1/4″ MPT

  • CD2012

    1/4″ f. flare coupler w/ depressor tip and seal x 1/2″ m. Acme

  • CD2010

    1/4″ f. flare swivel w/ depressor tip and seal x 1/4″ m. flare access, 90 deg configuration

  • CD2005

    1/4″ f. flare swivel x 1/4″ f. flare swivel, seals and no depressor tips

  • CD2000

    1/4″ f. flare swivel w/ depressor tip and seal x 1/4″ m. flare access

  • CD1819

    1/4″ m. flare access x 1/8″ MPT elbow body, CD2250 brass wrench cap and valve core, MPT end can accommodate 1/4″ OD tube

  • CD1454

    Straight connector- forged 1/4″ flare nut x 1/4″ m. flare access, all brass, tube has depressor tip, one valve core installed

  • CD1450

    Adapter- 1/4″ m. flare access w/ valve core x 1/4″ f. flare w/ copper gasket

  • CD1446

    Straight connector- 1/4″ f. flare swivel x 1/4″ f. flare swivel, no depressor tips

  • CD1444

    Adapter – 1/4″ MPT x 1/4″ m. flare access with valve core

  • CD1441

    1/4″ m. flare access x 1/4″ m. flare body, with one valve core, one 1/4″ flare nut

  • CD1440

    Straight connector- 1/8″ FPT x 1/4″ f. flare swivel, swivel end has double flare and depressor tip

  • CD2090

    1/4″ f. flare “Sure Seal” Retaining Coupler x 1/4″ m. flare, 90 deg configuration

  • CD1424

    Adapter – 1/4″ FPT x 1/4″ m. flare access, one valve core and no cap

  • CD9560SVK

    Refrigeration service kit, includes: CD8404 (3), CD8408 (3), CD8403 (3), CD8405 (3), CD3805 (1), CD3813 (1), CD8478 (1), CD8434 (1), CD8438 (1), CD9603 (2), CD2245 (10), CD5514 (3), CD5538 (3), CD5534 (1), CD5578 (1), CD5050 (1), CD9611 (2), CD1414 (1), C

  • CD9510SVK

    Access fitting service kit, includes: CD5050 (1), CD3805 (1), CD9603 (1), CD9611 (1), CD8403 (3), CD8404 (3), CD8405 (3), CD8408 (3), CD3813 (1), CD2056 (1), CD2245 (6)

  • CD2056

    5/16″ f. flare swivel w/ depressor tip and seal x 1/4″ m. flare access with 45 deg bend

  • CD3805

    Plastic tube container with six valve cores and one core wrench tool

  • CD5577

    Replacement rod and chuck for Core Removal Tools

  • CD5560

    Replacement shut-off stem for CD3900 and CD3910

  • CD5555

    Replacement o-rings for Core Removal Tools

  • CD5171

    “Sure Seal” repair kit: o-rings, washer, valve depressor, spring

  • CD5060

    Reduced size thumb-screw flow-control valve for 5/16″ m. flare access fitting

  • CD5050

    Reduced size thumb-screw flow-control valve for 1/4″ m. flare access fitting

  • CD5014

    1/4″ m. flare x 1/4″ f. flare with floating core depressor, use when normal depressor tips do not make contact

  • CD4540

    1/4″ f. flare coupler x 1/4″ m. flare straight ball valve w/ depressor tip

  • CD4040

    1/4″ f. flare coupler x 1/4″ m. flare straight ball valve w/ depressor tip

  • CD3990

    Superheat Kit w/ CD3930 (BV-CRT) and CD3975 thermometer

  • CD3975

    Thermometer w/ on-off switch, spare battery for use with CRT to measure superheat

  • CD3970

    Superheat Kit w/ CD3910 (CRT) and CD3975 thermometer

  • CD3936

    Core Removal Tool (CRT) for use on 3/16″ flare access fitting (automotive)

  • CD3933

    Ball Valve Core Removal Tool (BV-CRT) for use on 3/16″ flare access fitting (automotive), 1/4″ m. flare side port for attaching hose or gauge

  • CD3930

    Ball Valve Core Removal Tool (BV-CRT) for use on 1/4″ flare access fitting, 1/4″ m. flare side port for attaching hose or gauge

  • CD3920

    Ball Valve Core Removal Tool (BV-CRT) for use on 1/4″ flare access fitting

  • CD3917

    Kit w/ CD3915 CRT pick and CD3916 CRT thread chaser

  • CD3916

    Thread chaser tool, used with CRT to clean internal threads of an access fitting

  • CD3915

    Pick tool, used with CRT to extract a broken valve core without losing refrigerant

  • CD3910

    Core Removal Tool (CRT) for use on 1/4″ flare access fitting, 1/4″ m. flare side port for attaching hose or gauge

  • CD3900

    Core Removal Tool (CRT) for use on 1/4″ flare access fitting

  • CD3827

    Phillips head bit to be used with CD3820 torque wrench

  • CD3825

    Valve core bit to be used with CD3820 torque wrench

  • CD3820

    Adjustable torque wrench with CD3825 valve core bit

  • CD3813

    Brass valve core tool and container, with three valve cores, compact knurled design

  • CD3815

    Valve core torque driver, pre-set torque range of 4.5 – 5.0 in/lbs

  • CD3800

    Plastic storage container for valve cores, container cap has wrench tool and thread chaser, comes with six valve cores

  • CD3710

    Hi-side shut-off valve w/ connections of 1/4″ m. flare (no core) and 1/4″ f. flare swivel (depressor tip and seal) at 90 deg, metal to metal seat

  • CD3570

    Complete blower wheel puller kit w/ all sizes of hubs

  • CD3560

    5/32″ allen wrench for blower wheel puller

  • CD3555

    Replacement set screws for blower wheel puller

  • CD3545

    Replacement drive bolt and shank for blower wheel puller

  • CD3540

    Replacement drive bolt for blower wheel puller

  • CD3535

    1-5/8″ replacement hub only

  • CD3530

    Complete blower wheel puller for 1-5/8″ hub

  • CD3525

    1-1/2″ replacement hub only

  • CD3520

    Complete blower wheel puller for 1-1/2″ hub

  • CD3515

    1-3/8″ replacement hub only

  • CD3510

    Complete blower wheel puller for 1-3/8″ hub

  • CD3505

    1-1/4″ replacement hub only

  • CD3500

    Complete blower wheel puller for 1-1/4″ hub

  • CD2070

    Large thumb screw core depressor w/ back seat to hold gas in hose, coupler attaches to 1/4″ m. flare

  • CD2060

    Large thumb screw core depressor, coupler attaches to 1/4″ m. flare

  • CD2050

    Large thumb screw core depressor, coupler attaches to 3/16″ m. flare fitting

  • CD1808

    Oil tap for semi-hermetic compressor

  • CD4314

    Replacement piercing tip for CD4311 “Fastap” Pliers

  • CD9644

    Same as CD9640, with the addition of a 1/4″ m. flare access opposite the 1/4″ f. flare, one CD2245 cap and two valve cores

  • CD9640

    Two 1/4″ m. flare access fittings on ends of u-shaped copper tube, brazed on side of tube is 1/4″ f. flare with depressor tip, one valve core included

  • CD9628

    Forged brass tee, 1/4″ f. flare without depressor tip x 1/4″ m. flare access x 1/4″ m. flare access on branch, one valve core (CD9611 w/o depressor tip)

  • CD9627

    All brass, 1/4″ m. flare access x 1/4″ m. flare access x 1/4″ f. flare without depressor tip on branch, one valve core (CD9603 without depressor tip)

  • CD9623

    1/4″ m. flare access x 1/4″ m. flare access x 1/4″ m. flare access, two valve cores, no caps

  • CD9622

    1/4″ m. flare access x 1/4″ m. flare access x 1/4″ f. flare without depressor tip on branch and one valve core (CD9602 w/o depressor tip)

  • CD9621

    1/4″ f. flare without depressor tip x 1/4″ m. flare access x 1/4″ m. flare access on branch w/ one valve core (CD9601 w/o depressor tip)

  • CD9620

    1/4″ m. flare x 1/4″ m. flare x 1/8″ MPT on branch, CD2245 brass cap and valve core, MPT end has 1/4″ ID for tube, forged brass

  • CD9616

    1/4″ m. flare access x 1/8″ MPT (on run) x 1/4″ m. flare access on branch, CD2245 brass cap and valve core, MPT end has 1/4″ ID for tube, forged brass

  • CD9614

    1/4″ m. flare access x 1/4″ MPT (on run) x 1/4″ m. flare access on branch, CD2245 brass cap and valve core, MPT end has 5/16″ ID for tube, forged brass

  • CD9611

    1/4″ f. flare w/ depressor tip x 1/4″ m. flare access x 1/4″ m. flare access on branch, one valve core, forged brass

  • CD9610

    1/4″ f. flare hex x 1/4″ f. double flare w/ depressor tip x 1/4″ m. flare access on branch, CD2245 brass cap and valve core

  • CD9608

    1/8″ f. NPT hex x 1/4″ flare nut w/ depressor tip x 1/4″ m. flare access on branch, CD2245 brass cap and valve core

  • CD9606

    1/4″ m. flare access x 1/4″ flare nut w/ depressor tip x 1/4″ flare nut w/ depressor tip on branch, CD2245 brass cap and valve core

  • CD9603

    1/4″ m. flare access x 1/4″ m. flare access x 1/4″ f. flare w/depressor tip on branch, one valve core, all brass

  • CD9602

    1/4″ m. flare access x 1/4″ m. flare access x 1/4″ f. flare with depressor tip on branch and one valve core

  • CD9601

    1/4″ f. flare with depressor tip x 1/4″ m. flare access x 1/4″ m. flare access on branch w/ one valve core

  • CD5044

    1/4″ m. flare (no core) x 1/4″ f. flare coupler (o-ring seal) x 1/4″ m. flare (no core) on branch

  • CD1438

    Tee connector – 1/4″ m. flare access on branch and 1/8″ MPT on each end of run, CD2250 brass wrench cap and valve core

  • CD1428

    Tee connector – 1/4″ m. flare access on branch and 1/8″ MPT and 1/8″ FPT on run, CD2250 brass wrench cap and valve core

  • CD8725

    Adapter – 1/4″ m. flare access x 1/4″ f. flare with gasket (no swivel), to go over old access fitting with bad internal threads

  • CD8506

    Solder access tee, forged brass, 3/8″ ID and 1/2″ OD on solder ends, CD2245 cap and valve core

  • CD8505

    Solder access tee, forged brass, 5/16″ ID and 3/8″ OD on solder ends, CD2245 cap and valve core

  • CD8504

    Solder access tee, forged brass, 1/4″ ID and 3/8″ OD on solder ends, CD2245 cap and valve core

  • CD3094

    Braze-on copper saddle valve for 1/4″ copper tube, CD2245 cap and valve core, must be used in conjuction with Core Removal Tool and CD3090

  • CD3092

    Braze-on copper saddle valve for 1/2″ copper tube, CD2245 cap and valve core, must be used in conjuction with Core Removal Tool and CD3090

  • CD3090

    Accessory tool for piercing tubing, must be used with Core Removal Tools and V-Series fittings

  • CD3078

    Braze-on copper saddle valve for 7/8″ copper tube, CD2245 cap and valve core, must be used in conjuction with Core Removal Tool and CD3090

  • CD2878

    Braze-on self-piercing brass saddle valve for 7/8″ copper tube, CD2245 brass cap and valve core

  • CD2858

    Braze-on self-piercing brass saddle valve for 5/8″ copper tube, CD2245 brass cap and valve core

  • CD2838

    Braze-on self-piercing brass saddle valve for 3/8″ copper tube, CD2245 brass cap and valve core

  • CD2834

    Braze-on self-piercing brass saddle valve for 3/4″ copper tube, CD2245 brass cap and valve core

  • CD2818

    Braze-on self-piercing brass saddle valve for 1-1/8″ copper tube, CD2245 brass cap and valve core

  • CD2816

    Braze-on self-piercing brass saddle valve for 5/16″ copper tube, CD2245 brass cap and valve core

  • CD2814

    Braze-on self-piercing brass saddle valve for 1/4″ copper tube, CD2245 brass cap and valve core

  • CD2812

    Braze-on self-piercing brass saddle valve for 1/2″ copper tube, CD2245 brass cap and valve core

  • CD2580

    Self-piercing line tap for 5/8″ copper tube, CD2245 cap and valve core

  • CD2380

    Self-piercing line tap for 3/8″ copper tube, CD2245 brass cap and valve core

  • CD2160

    Self-piercing line tap for 5/16″ copper tube, CD2245 brass cap and valve core

  • CD2140

    Self-piercing line tap for 1/4″ copper tube, CD2245 brass cap and valve core

  • CD2120

    Self-piercing line tap for 1/2″ copper tube, CD2245 brass cap and valve core

  • CR8408

    1/4″ m. flare access fitting w/ 1/8″ copper tube extension, tube has beaded stop .16 from end for seating, CD2245 brass cap and valve core

  • CR8406

    1/4″ m. flare access fitting w/ 3/8″ copper tube extension, tube has beaded stop .16 from end for seating, CD2245 brass cap and valve core

  • CR8405

    1/4″ m. flare access fitting w/ 5/16″ copper tube extension, tube has beaded stop .16 from end for seating, CD2245 brass cap and valve core

  • CR8404

    1/4″ m. flare access fitting w/ 1/4″ copper tube extension, tube has beaded stop .16 from end for seating, CD2245 brass cap and valve core

  • CR8403

    1/4″ m. flare access fitting w/ 3/16″ copper tube extension, tube has beaded stop .16 from end for seating, CD2245 brass cap and valve core

  • CD9160

    1/4″ m. flare access body, solder end has 1/4″ OD step, extended flare length of 9/16″, extended hex length of 7/16″, CD2245 brass cap and valve core

  • CD8490

    1/4″ m. flare access on 3/8″ 90 deg bent copper tube, CD2245 brass cap and valve core

  • CD8478

    Tee with 1/4″ m. flare access on copper tube that takes 7/8″ OD tube, CD2250 brass wrench cap and valve core

  • CD8458

    Tee with 1/4″ m. flare access on 5/8″ copper tube, swaged at each end for 5/8″ OD tube, CD2250 brass wrench cap and valve core

  • CD8438

    Tee with 1/4″ m. flare access on 3/8″ copper tube, swaged at each end for 3/8″ OD tube, CD2250 brass wrench cap and valve core

  • CD8434

    Tee with 1/4″ m. flare access on copper tube that takes 3/4″ OD tube, CD2250 brass wrench cap and valve core

  • CD8429

    Tee with 1/4″ m. flare access on 3/4″ OD x 3″ copper tube, swaged on one end, CD2250 brass wrench cap and valve core

  • CD8427

    Tee with 1/4″ m. flare access on 1/2″ OD x 3″ copper tube, swaged on one end, CD2250 brass wrench cap and valve core

  • CD8426

    Tee with 1/4″ m. flare access on 3/8″ OD x 3″ copper tube, swaged on one end, CD2250 brass wrench cap and valve core

  • CD8425

    Tee with 1/4″ m. flare access saddled on 5/16″ OD x 3″ copper tube, swaged on one end, CD2250 brass wrench cap and valve core

  • CD8420

    Tee with 1/4″ m. flare access saddled on 1/4″ OD x 3″ copper tube, swaged on one end, CD2250 brass wrench cap and valve core

  • CD8416

    Tee with 1/4″ m. flare access on 5/16″ copper tube, swaged at each end for 5/16″ OD tube, CD2250 brass wrench cap and valve core

  • CD8414

    Tee with 1/4″ m. flare access on 1/4″ copper tube, swaged at each end for 1/4″ OD tube, CD2250 brass wrench cap and valve core

  • CD8412

    Tee with 1/4″ m. flare access on 1/2″ copper tube, swaged at each end for 1/2″ OD tube, CD2250 brass wrench cap and valve core

  • CD8408

    1/4″ m. flare access fitting w/ 1/8″ copper tube extension, CD2245 brass cap and valve core

  • CD8406

    1/4″ m. flare access fitting w/ 3/8″ copper tube extension, CD2245 brass cap and valve core

  • CD8405

    1/4″ m. flare access fitting w/ 5/16″ copper tube extension, CD2245 brass cap and valve core

  • CD8404

    1/4″ m. flare access fitting w/ 1/4″ copper tube extension, CD2245 brass cap and valve core

  • CD8403

    1/4″ m. flare access fitting w/ 3/16″ copper tube extension, CD2245 brass cap and valve core

  • CD8400

    1/4″ m. flare access body, solder end has 1/8″ ID and 3/16″, 1/4″ and 5/16″ OD steps, CD2245 brass cap and valve core

  • CD5578

    Braze-on self-piercing copper saddle valve for 7/8″ tube

  • CD5558

    Braze-on self-piercing copper saddle valve for 5/8″ tube

  • CD5538

    Braze-on self-piercing copper saddle valve for 3/8″ tube

  • CD5534

    Braze-on self-piercing copper saddle valve for 3/4″ tube

  • CD5518

    Braze-on self-piercing copper saddle valve for 1-1/8″ tube

  • CD5516

    Braze-on self-piercing copper saddle valve for 5/16″ tube

  • CD5514

    Braze-on self-piercing copper saddle valve for 1/4″ tube

  • CD5512

    Braze-on self-piercing copper saddle valve for 1/2″ tube”

  • CD5421

    Tee with 1/4″ m. flare access on 5/16″ OD x 2″ copper tube, will connect 1/4″ tube, 5/16″ swaged tube or 3/8″ tube, CD2250 brass wrench cap and valve core

  • CD5055

    1/4″ m. flare access body, solder end has 7/32″ and 5/16″ OD steps, CD2245 brass cap and valve core

  • CD4545

    1/4″ m. flare access body, solder end has 1/4″ and 9/32″ OD steps, CD2245 brass cap and valve core

  • CD4358

    Self-piercing line tap valve for 1/2″ and 5/8″ tube

  • CD4338

    Self-piercing line tap valve for 1/4″, 5/16″, and 3/8″ tube

  • CD3619

    1/4″ m. flare access body, solder end has 1/8″ ID and 3/16″, 1/4″ and 5/16″ OD steps, CD2250 brass wrench cap and valve core

  • CD3608

    1/4″ m. flare access fitting w/ 1/8″ copper tube extension, CD2250 brass wrench cap and valve core, 1/8″ MPT below hex

  • CD3606

    1/4″ m. flare access fitting w/ 3/8″ copper tube extension, CD2250 brass wrench cap and valve core

  • CD3605

    1/4″ m. flare access fitting w/ 5/16″ copper tube extension, CD2250 brass wrench cap and valve core

  • CD3604

    1/4″ m. flare access fitting w/ 1/4″ copper tube extension, CD2250 brass wrench cap and valve core, 1/8″ MPT below hex

  • CD3603

    1/4″ m. flare access fitting w/ 3/16″ copper tube extension, CD2250 brass wrench cap and valve core, 1/8″ MPT below hex

  • CD3602

    1/4″ m. flare access fitting w/ 1/4″ copper tube extension, 3/16″ and 1/8″ removable bushings, fits many sizes of holes, CD2250 brass wrench cap and valve core, 1/8″ MPT below hex

  • CD3600

    1/4″ m. flare access body, solder end has 1/8″ ID and 3/16″, 1/4″ and 5/16″ OD steps, CD2250 brass wrench cap and valve core, 1/8″ MPT below hex

  • CD3456

    1/4″ m. flare access fitting w/ 5/16″ OD copper tube extension and 1/4″ OD copper bushing insert, CD2250 brass wrench cap and valve core

  • CD3436

    1/4″ m. flare access w/ 1/4″ OD copper tube extension and 3/16″ copper bushing insert, CD2250 brass wrench cap and valve core, 1/8″ pipe threads below hex

  • CD3434

    1/4″ m. flare access fitting w/ 3/16″ OD copper tube extension and 1/8″ copper bushing insert, CD2250 brass wrench cap and valve core, 1/8″ MPT below hex

  • CD3368

    1/4″ m. flare access body, solder end has 3/8″ ID and 1/2″ OD step, CD2245 brass cap and valve core

  • CD3338

    1/4″ m. flare access body, solder end has 3/16″ ID and 1/4″, 3/8″ OD steps, CD2245 brass cap and valve core

  • CD3358

    1/4″ m. flare access body, solder end has 5/16″ ID and 1/2″ OD step, CD2245 brass cap and valve core

  • CD3346

    1/4″ m. flare access body, solder end has 1/4″ ID and 3/8″, 7/16″ OD steps, CD2245 brass cap and valve core

  • CD3098

    Braze-on copper saddle valve for 3/8″ copper tube, CD2245 cap and valve core, must be used in conjuction with Core Removal Tool and CD3090

  • CD3096

    Braze-on copper saddle valve for 5/16″ copper tube, CD2245 cap and valve core, must be used in conjuction with Core Removal Tool and CD3090

  • CD3095

    Braze-on copper saddle valve for 5/8″ copper tube, CD2245 cap and valve core, must be used in conjuction with Core Removal Tool and CD3090

  • CD3034

    Braze-on copper saddle valve for 3/4″ copper tube, CD2245 cap and valve core, must be used in conjuction with Core Removal Tool and CD3090

  • CD3018

    Braze-on copper saddle valve for 1-1/8″ copper tube, CD2245 cap and valve core, must be used in conjuction with Core Removal Tool and CD3090

  • CD2576

    1/4″ m. flare access body, flare length extended to 5/8″, solder end has 1/4″ ID and 11/32″ OD step, CD2245 brass cap and valve core

  • CD2574

    1/4″ m. flare access body, flare length extended to 7/8″, solder end has 1/4″ ID and 3/8″ OD step, CD2217 cap and valve core

  • CD2525

    1/4″ m. flare access fitting w/ 1/4″ copper tube extension, CD2250 brass wrench cap and valve core

  • CD2506

    1/4″ m. flare access body, solder end has 1/4″ ID and 3/8″ OD step, CD2245 brass cap and valve core

  • CD2500

    1/4″ m. flare access body, solder end has 1/4″ ID and 5/16″ OD step, CD2245 brass cap and valve core

  • CD2243

    1/4″ m. flare access body, flare length extended to 3/4″, solder end has 1/8″ ID and 1/4″, 5/16″ OD steps, CD2217 cap and valve core, for use on bulkhead

  • CD1414

    1/4″ m. flare access x 1/4″ MPT body, CD2250 brass wrench cap and valve core, MPT end can accommodate 5/16″ OD tube

  • CD1212

    1/4″ m. flare access fitting w/ 3/16″ OD copper tube extension, CD2250 brass wrench cap and valve core

  • CD1200

    1/4″ m. flare access body, solder end has 3/16″ ID and 1/4″, 5/16″ OD steps, CD2245 brass cap and valve core

  • CD1010

    1/4″ m. flare access w/ 1/8″ OD copper tube extension, CD2250 brass wrench cap and valve core

  • CC8478

    Tee with 1/4″ m. flare access on copper tube that takes 7/8″ OD tube, CD2245 brass cap and valve core

  • CC8458

    Tee with 1/4″ m. flare access on 5/8″ copper tube, swaged at each end for 5/8″ OD tube, CD2245 brass cap and valve core

  • CC8438

    Tee with 1/4″ m. flare access on 3/8″ copper tube, swaged at each end for 3/8″ OD tube, CD2245 brass cap and valve core

  • CC8434

    Tee with 1/4 m. flare access on copper tube that takes 3/4 OD tube, CD2245 brass cap and valve core

  • CC8431

    Tee with 1/4″ m. flare access on 7/8″ OD x 3″ copper tube, swaged on one end, CD2245 cap and valve core

  • CC8429

    Tee with 1/4″ m. flare access on 3/4″ OD x 3″ copper tube, swaged on one end, CD2245 cap and valve core

  • CC8428

    Tee with 1/4 m. flare access on 5/8 OD x 3 copper tube, swaged on one end, CD2245 cap and valve core

  • CC8427

    Tee with 1/4″ m. flare access on 1/2″ OD x 3″ copper tube, swaged on one end, CD2245 cap and valve core

  • CC8426

    Tee with 1/4″ m. flare access on 3/8″ OD x 3″ copper tube, swaged on one end, CD2245 cap and valve core

  • CC8425

    Tee with 1/4″ m. flare access saddled on 5/16″ OD x 3″ copper tube, swaged on one end, CD2245 cap and valve core

  • CC8420

    Tee with 1/4″ m. flare access saddled on 1/4″ OD x 3″ copper tube, swaged on one end, CD2245 cap and valve core

  • CC8416

    Tee with 1/4″ m. flare access on 5/16″ copper tube, swaged at each end for 5/16″ OD tube, CD2245 brass cap and valve core

  • CC8414

    Tee with 1/4″ m. flare access on 1/4″ copper tube, swaged at each end for 1/4″ OD tube, CD2245 brass cap and valve core

  • CD0410

    1/4 flare nut

  • CD7500

    7/16″ m. Acme access body for a 1/4″ OD tube, CD2223 cap and valve core

  • CD4315/2

    Replacement gasket for piercing tip of CD4311 “Fastap” Pliers

  • CD7418

    1/2″ m. Acme access x 1/8″ MPT body, CD2220 cap and valve core

  • CD7414

    1/2″ m. Acme access x 1/4″ MPT body, CD2220 Acme cap and valve core

  • CD2210

    1/4 flare cap, round black glass-filled nylon w/ neoprene o-ring seal

  • CD0500

    Copper gasket, for use with CD2225 cap

  • CC8412

    Tee with 1/4″ m. flare access on 1/2″ copper tube, swaged at each end for 1/2″ OD tube, CD2245 brass cap and valve core

  • CC5421

    Tee with 1/4″ m. flare access on 5/16″ OD x 2″ copper tube, will connect 1/4″ tube, 5/16″ swaged tube or 3/8″ tube, CD2245 brass cap and valve core

  • CC1818

    1/4″ m. flare access x 1/8″ MPT body, CD2245 brass cap and valve core

MANUALS

CATALOGS